Posted on: 18 August 2016Share
Building a custom tiny house is a great way to design and implement all types of compacted designs. Along with the tiny size, a tiny house has a lot of differences from a traditional home. As you plan out accessories, wiring, and other features on the tiny house, you will need to purchase a number of parts. One of the main parts that you need to consider is a rubber grommet. These small circular parts can be used for all types of applications on a tiny house, including the organization of wires and electrical cables. Instead of ordering standard grommets, you can set up custom orders with specifications catered directly to a tiny house. Browse through these custom options and see how they can help with the construction of your tiny house.
The walls of a tiny house are typically not as thick or insulated as a standard home. When running wires to the inside or outside of a tiny home, you want to make sure that the area is protected from outside elements like wind and rain. When ordering rubber grommets, you can make sure that your order includes extended weather seals. These seals are the thick flaps that extend outside of the grommet. The bottom of the seal should be made flat so that it sits flat against the wall of the tiny home. Once they are installed, the grommets will help prevent extra moisture or cold air from entering the tiny house.
A lot of tiny houses are made with portability in mind. A tiny house may have wheels built on it or be mounted to a trailer itself. If this is the case, then all of the elements inside the house will have to withstand the vibration and movements of the house when it travels on roads. As you order custom rubber grommets, you can protect the wires and items going through them by increasing the vibration control on the grommet. The vibration control is typically set by the opening center of the grommet. The diameter of the center can be made small enough to fit wires exactly. This will prevent wiring from getting twisted or pulled as the tiny house is in motion.
One of the easiest things you can customize with a grommet is the size. In a tiny house, you have single wire applications in small sections of the home. For example, you may need to wire a single co-axial cable to the front room of the tiny house. Ordering tiny grommets can help conserve space while still fitting the wire neatly in the grommet. It's a good idea to measure the diameter of the wires you are using for the tiny house. This will help you order exact sizes and get the grommets you need without wasting extra space or ordering the wrong grommets for your tiny house project.
A traditional grommet features the same size on both sides of the hole. When you are trying to fit tight locations inside your tiny house, this can create possible installation problems. Luckily, you can order rubber grommets with angled ends on them. For example, when you want to run a wire from the ceiling of a rubber house and down the side of a wall, you can use a grommet that inserts evenly and then angles the wire downward towards the wall. This makes it easier to guide wires and keep them facing the same direction when installed in the walls of the home. Use custom orders to plan out different angles that can fit neatly into the tight spaces of a tiny home. By using rubber grommets, you can stay organized and not have to force wires into angles that may create problems in the future if the grommets are not used.
Contact a custom rubber company for details on orders and various pricing estimates. Having all of these details early on will make the tiny house building go a lot smoother.